|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BESERIES INTRODUCTIONS SWITCH CONNECTOR FILTERS SPECIFICATIONS 1. Maximum leakage current each line-to-ground @ 115VAC 60Hz: 0.25mA @ 250VAC 50Hz: 0.45mA 2. Hipot rating (one minute) line-to-ground: 2250VDC line-to-line: 1450VDC 3. Operating frequency: 50/60Hz 4. Rated voltage: 115/250VAC V DE 1. Designed as a general purpose filter with a switch effective EMI supression for both common and differential mode noise. 2. With optional resistor and 3300pF/1000pF COMPONENTS PART NO. Cx (uF) L (mH) Cy (pF) R (M ) Lg (mH) 03BEEG3G/NG3G 2200 03BEEG3GM/NG3GM 2.4 03BEEG3GA/NG3GA 2200 0.12 06BEEG3G/NG3G 2200 06BEEG3GM/NG3GM 0.1 0.8 1.0 06BEEG3GA/NG3GA 2200 0.12 10BEEG3G/NG3G 2200 10BEEG3GM/NG3GM 0.3 10BEEG3GA/NG3GA 2200 0.12 A: with ground choke M: medical type ELECTRICAL SCHEMATIC SW L L I N E R C1 C2 L C2 L O A D L' N G N' G' MINIMUM INSERTION LOSS IN dB COMMON MODE (L-G) IN 50 OHM SYSTEM CURRENT FREQUENCY-MHz RATING .15 .50 1.0 5.0 10 3A (G) (A) 20 30 35 35 35 3A (M) 20 30 35 20 15 6A (G) (A) 10 20 25 35 40 6A (M) 10 20 20 20 15 10A (G) (A) 5 10 20 30 35 10A (M) 5 10 10 15 15 DIFFERENTIAL MODE (L-L) IN 50 OHM SYSTEM 3A (G) (A) 4 10 20 35 35 3A (M) 5 15 20 30 30 6A (G) (A) 4 10 10 35 35 6A (M) 4 10 15 25 25 10A (G) (A) 5 10 20 30 35 10A (M) 4 10 10 20 20 L SW L I N E Lg R: OPTION L' L O A D 30 35 5 35 10 35 10 40 20 40 20 35 20 R C1 C2 L C2 N G N' G' 3GA ONLY R0.098(8X) R2.5(8X) 1.417 36.0 1.50 REF. 38.3 REF. 1.614 41.0 M3 R0.14 R3.5 0.417 0.004 36.00 0.1 1.122 0.004 28.5 0.1 1.535 0.004 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) MECHANICAL CONSTRUCTION 1.713 REF. 43.5 REF. 2.146 REF. 54.5 REF. 2.264 REF. 57.5 REF. 39.0 0.1 BEEG3G R0.098(8X) R2.5(8X) 1.22 0.004 31.0 0.1 1.50 REF. 38.3 REF. 1.614 41.0 R0.14 R3.5 1.1120.0 04 28.25 0.1 SUGGESTED MOUNTING CUTOUT (MOUNTING FROM FRONT) BENG3G BEEG3G 1.713 REF. 43.5 REF. 2.146 REF. 54.5 REF. 2.264 REF. 57.5 REF. 1.563 0.004 39.70 0.1 Suggested thickness of mounting panel is from 0.04(1.0) to 0.63(1.6) inch(mm) of mounting cutout BENG3G 4-10 UNIT: INCH mm |
Price & Availability of 03BEEG3G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |